Kitchen appliances

Dishwasher installation & replacement in Pensacola, FL

Bought a new dishwasher and need it hooked up right? We pull the old one, connect the new one, and run it through a full cycle with the kick plate off before we leave.

  • Licensed CFC1430934
  • 24/7 emergency calls
  • Old unit hauled away
Stainless double kitchen sink after a drain repair
under the kitchen sink
After: new white PVC drain trap installed under the same kitchen sink
new drain, dry cabinet
Before: leaking kitchen sink drain with a bucket catching water under the cabinet
Most leaks start here

What a good dishwasher install includes

Most dishwasher leaks we see come from the install, not the machine. A reused supply line, a drain hose with no high loop, or a fitting that was snugged by hand and never checked.

When we put one in, we take care of the parts nobody sees.

  • New braided supply line and shutoff valve
  • Drain hose with a proper high loop or air gap
  • Unit leveled and secured to the counter
  • Full test cycle while we watch for drips
What we do

Installs, swaps, and the fixes in between

01

New installs

Adding a dishwasher where there wasn’t one? We run the water line and drain connection. If the spot needs an outlet, we’ll tell you before we start.

02

Replacements

Same spot, new machine. We disconnect the old one, check the valve and the drain connection, and replace anything that looks worn.

03

Leak repairs

Water on the floor after a cycle usually traces back to the supply fitting, the drain hose, or the door seal. We find which one.

04

Drain problems

Standing water in the bottom usually means a clogged drain hose, a full disposal, or a kinked line. We clear it and fix the cause.

“They were very prompt, and educated us on all the options without any upsell, did a superb job on the installation, all at a very fair price.”
Eric Thomas
Good questions

Dishwasher FAQ

Can you install a dishwasher I bought myself?

Yes. Buy it wherever you like and we’ll put it in. Have it delivered before we come out, and leave it in the box so nothing gets scratched.

How long does an install take?

A straight swap usually takes an hour or two. A new install where there was no dishwasher before takes longer, because we run new lines.

Why does my dishwasher leave standing water?

Usually a drain problem. Food builds up in the filter or the drain hose, or the disposal it drains into is full. Clean the filter first. If water still sits in the bottom, give us a call.

Do I need an air gap?

Some kitchens need one and some use a high loop instead. Your sink setup and the local code decide it, and we set it up the right way for your kitchen.

While we're there

Other work we do around the house

All residential services
Emergency line answered 24/7

Dishwasher sitting in the garage?

Call and we’ll get it hooked up. Or send the model number and we’ll call you back.

(850) 434-5549